Friday, January 4, 2013

BC548 Heat Sensor Diagram Circuit

BC548 Heat Sensor Circuit


Heat sensor circuit can be used to control any device using heat sensor. In this circuit a thermistor and a resistance is connected in series. This arrangement makes a potential divider circuit. Here the thermistor is Negative Temperature Coefficient type. So when the room temperature is increased its resistance decreases simultaneously and more current flows through the resistor and the thermistor. We find more voltage at the junction of the resistor and the thermistor.

Our thermistor resistance value is 110 ohms. Suppose the resistance value becomes 90 ohms after heating the 110 ohms thermistor. Then the voltage across one resistor of the voltage divider circuit equals the ratio of that resistor’s value and the sum of resistances of the voltage across the series combination. This is the concept of voltage divider. The final output voltage of the voltage divider circuit is now applied to the npn transistor (BC548) through the base resistor (3.3K ohms). Here the emitter resistor is replaced with a zener diode. Emitter voltage is maintained at 4.7volt with the help of zener diode. This voltage is used to compare voltage. Transistor conducts when base voltage is greater than the emitter voltage. Transistor conducts if it gets more than 4.7volt of base voltage. Then the circuit is completed through buzzer and it gives sound.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.